Kenwood TS 590 SG.

Kenwood TS 590 SG Supplied With 12 Months Warranty.

Kenwood TS 590 SG.

Kenwood TS 590 SG  introduces new HF/50MHz All-Mode Transceiver. Four years ago we launched our best-selling TS-590S transceiver into the mid-range HF market.

Technology has moved on, so now it is a pleasure to announce the updated Kenwood TS-590SG model, which replaces the TS-590S in production.

Kenwood TS 590 SG.

The Kenwood TS 590 SG is Equipped with 500 Hz/ 2.7 kHz Roofing Filter as standard.

1st IF frequency (11.374 MHz) down conversion* is employed when receiving on 15, 20, 40, 80 or 160 meter bands. Included as standard directly after the 1st Mixer and Post Amp that compensates for conversion loss is a BW 500 Hz and 2.7 kHz 6-pole MCF, which determines adjacent receptivity realizing superb dynamic range performance that was not possible using up conversion.

Even when an interfering signal approaches the reception frequency, a virtually flat dynamic range is maintained.

You can capture a clear signal even in reception conditions where strong adjacent interfering signals become problematic.

Kenwood TS 590 SG.

* Down conversion is selected automatically when receiving in CW/ FSK/ SSB modes if the final passband is 2.7 kHz or less.

Advanced AGC control through digital signal processing from the IF stage onward.

It would be no exaggeration to say that Kenwood’s receive audio, which enjoys a reputation for being non-tiring even in long contests, is determined by IF AGC control based on unique DSP algorithms.

This series features all of the IF DSP AGC technology developed with the TS-990S. A remodeling of the AGC circuitry has realized superb AGC performance covering from small to large inputs.

Even if interference signals slip between the Roofing Filter and the IF DSP filter that determines the final selection, level optimized AGC control enables operation without the need for awareness of Roofing Filter bandwidth.

Kenwood TS 590 SG.

Morse code decoder function.

Received morse code displayable* by scrolling on 13-segment display unit. Moreover, characters are shown* in a dedicated window on the ARCP-590G (freeware).

* Proper decoding may not be available due to reception conditions, etc.

Programmable functions.

Kenwood TS 590 SG.

Frequently used and special functions can be assigned to the programmable function (PF) keys.

With the TS-590SG, in addition to the PF keys, functions can also be assigned to the MULTI/CH knob’s Push SW.

Quick settings are made possible by assigning level setting functions such as keying speed.

The RIT/XIT/CL keys can also be used as programmable function keys.

New Split function enabling quick setting.

In addition to conventional split frequency setting methods, the TS-990’s proven split setting functionality has been included.

A long press of the SPLIT key, when making a 2 kHz upsetting, will enable quick setting by pressing “2” on the keypad. Furthermore, in simplex operation with just XIT on, the XIT frequency can be changed with TF-SET.

The keypad keys are band-direct keys. Each band has 3 memories, enabling quick call-up of usually-used frequencies.

Kenwood TS-590SG.

Other features.

Antenna output function (shared with DRV connector).

LED backlight with selectable color tone.

FIL A/B configurable independently with VFO A/B (convenient during Split operation).

Front or rear PTT selectable for Data PTT.

Switching from HI CUT/LO CUT to WIDTH/SHIFT possible for reception bandwidth changing in SSB mode.

Interference/noise removal features.

Heavy-duty design is capable of withstanding grueling conditions typical of contests or long hours of hard operation with two of 60mm fan cooling system.

Built-in preset-type high speed operation automatic antenna tuner.

Kenwood TS 590 SG.

Key Features.

TS-590SG Upgraded features, replaces the original TS-590S model.

Enhanced RX performance with superb 3rd-order Dynamic Range.

New On-screen CW decoder.

Extended Digital IF Filter selections.

“ANT Out” function like TS-990S.

TX/RX Equalizer DSP now settable per Mode.

Now up to 20 steps adjustment for TX Monitor and CW Side-tone.

Enhanced VGS-1 “Voice Guide” functions.

New Quick Split-frequency Operation function like TS-990S.

New Tri-Colour LCD Display (Amber, Green or Yellow).

Extra (3rd) PF function via push-switch in the MULTI/CH knob.

Deluxe new VFO knob design.

Kenwood TS 590 SG.

OPTIONAL ACCESSORIES: • MC-90 Deluxe Desktop Microphone. • MC-60A Desktop Microphone. • MC-47 Hand Microphone (4 PF Buttons). • MC-43 Hand Microphone. • HS-6 Headphone. • HS-5 De-luxe Headphone. • PG-20 DC Cable (7 metres). • SO-3 TCXO. • MB-430 Mobile Bracket. • PS-60 Heavy-duty Power Supply (22.5A). • KES-3S External Speaker. • SP-23 External Speaker. • VGS-1 Voice Guide & Storage Unit. • ARCP-590G Radio Control Program. • ARHP-590G Radio Host ProgramKenwood HS-5, Kenwood SP-23, Kenwood MC-60A, Kenwood MC-90.

Kenwood TS 590 SG.

 

 Amateur Radio Shops HAM Radio Dealer Supplier Retailer LAMCO New/Second Hand Twelve Months Warranty. Near Jnc 36 M1 Motorway. Barnsley, South Yorkshire, UK. Amateur Radio Sales. HAM Radio Sales. We are Premier Dealers For Icom, Kenwood & Yaesu. hamradio-shop is my favourite HAM store! HAM Radio Shop, HAM Radio Shops, Amateur Radio Dealers, Amateur Radio Dealers UK. Amateur radio Dealers, HAM radio dealers UK. We are a family business supplying world leading amateur radio equipment. Transceiver, rig, HF, atu, trx, Internal ATU, base rig, base transceiver, home base, mains power, base station, multiband, multi band, multi-band, internal atu, field radio.

Kenwood TS 590 SG.

Click Here for more information Kenwood TS-590SG

Kenwood TS-590SG,

TS-590SG,

Kenwood TS590SG,

Kenwood TS-590 SG,

Kenwood TS 590SG,

qsl-card-new

• Condition: Occasion
• Brand: Kenwood
• Type: Base Station
• Model: TS-590SG
• Frequency Band(s): HF
• Supported Modes: AM, FM, SSB, CW

Voir Plus