Référence : MA4
Disponibilité: En stock fournisseur Livraison: Sous 2 jours ouvrés Garantie: 3 ans pièces & main-d'oeuvreJBL - MA4 - Amplificateur DSI 2.0, 4 x 1200 W sous 4 ohms
Avec la série DSi 2.0, JBL propose sa première gamme d'amplificateurs dédiée au cinéma. Elle s’appuie sur la technologie d'amplificateur Crown DSi Digital Screen Array et intègre le DSP de la célèbre série CDi DriveCore de Crown pour fournir une amplification puissante et efficace et un traitement du signal haut de gamme pour toutes les gammes d’enceintes cinéma JBL. Les gestionnaires de cinéma et les intégrateurs qui cherchent à maximiser leur investissement et à pérenniser leurs systèmes peuvent compter sur les amplificateurs JBL DSi 2.0 pour obtenir des performances élevées et fiables dans des solutions ultra-efficaces.
DSP haut de gamme
Les amplificateurs DSi 2.0 sont dotés d’un traitement DSP interne 96 kHz / 32 bits à virgule flottante disposant d’un délai (jusqu'à 1000 ms), d’un égaliseur paramétrique, d’un crossover, de traitements FIR, d’un limiteur LevelMAX et plus encore, éliminant le besoin d'un processeur externe.
Une meilleure densité de puissance
La technologie brevetée DriveCore de Crown intègre de manière transparente l’ensemble des étages d’amplification en les fusionnant en un unique circuit intégré pour une plus haut niveau d’efficacité, de fiabilité et de performance. En utilisant cette technologie DriveCore, les amplificateurs DSi 2.0 fournissent une plus grande densité de puissance que les conceptions traditionnelles, offrant 4 canaux d'amplification avec sorties pontables dans un seul châssis 2U. L'utilisation du mode 2Ω à haut rendement permet d'alimenter jusqu'à 4 enceintes surround à partir d'un seul canal.
Pré-réglages dédiés JBL
En proposant des pré-réglages dédiés aux modèles d’enceintes cinéma JBL, ces amplificateurs gèrent en niveaux et en fréquences les signaux envoyés aux transducteurs, maximisant l’efficacité du système et optimisant la qualité du signal audio, tout en empêchant les dégâts matériels et simplifiant le déploiement des systèmes de diffusion cinéma.
Surveillance et gestion à distance
La connectivité SNMP interface les amplificateurs avec les solutions de gestion de cinéma dont les systèmes Cinema Control (NOC) pour une surveillance à distance de l'état et des défauts. Un port HiQnet fournit l'accès au logiciel Audio Architect de HARMAN pour contrôler, configurer et surveiller le fonctionnement de l'amplificateur via un réseau TCP/IP standard. Un port combiné GPIO/AUX peut être utilisé pour rappeler en externe les pré-réglages, couper les canaux, surveiller le bon fonctionnement de l'amplificateur et gérer la mise en service ou l’arrêt de l'amplificateur.
Réseau audio
La connectivité AES67 permet une distribution audio en réseau depuis tout appareil compatible Dante/AES67 et offre une liaison directe aux Interfaces Dolby Atmos Connect. Deux ports réseau audio prennent en charge les réseaux primaires et secondaires configurés comme commutés ((daisy chain) ou redondants (en étoile). Uniquement pour les modèles SA4-D, MA4-D et LA4-D)
Caractéristiques :
Reference : MA4
3 689,00 €
Availability: Available in supplier stock Processing time: Under 2 working days Guaranty: 3 years by manufacturerJBL - MA4 - DSI 2.0 amplifier, 4 x 1200 W under 4 ohms
With the DSi 2.0 series, JBL offers its first range of amplifiers dedicated to cinema. It is based on Crown DSi Digital Screen Array amplifier technology and incorporates Crown's acclaimed CDi DriveCore series DSP to provide powerful and efficient amplification and high-end signal processing for all ranges of cinema loudspeakers. JBL. Theater managers and integrators looking to maximize their investment and future-proof their systems can rely on JBL DSi 2.0 amplifiers to deliver high, reliable performance in ultra-efficient solutions.
High-end DSPs
DSi 2.0 amplifiers feature internal 96kHz/32-bit floating point DSP processing featuring delay (up to 1000ms), parametric EQ, crossover, FIR processing, a LevelMAX limiter and more, eliminating the need for an external processor.
Better power density
Crown's patented DriveCore technology seamlessly integrates all amplifier stages by merging them into a single integrated circuit for the highest level of efficiency, reliability and performance. Using this DriveCore technology, DSi 2.0 amplifiers provide greater power density than traditional designs, offering 4 channels of amplification with bridgeable outputs in a single 2U chassis. Using the high efficiency 2Ω mode allows up to 4 surround speakers to be powered from a single channel.
Dedicated presets JBL
By offering presets dedicated to JBL cinema loudspeaker models, these amplifiers manage the levels and frequencies of the signals sent to the transducers, maximizing the efficiency of the system and optimizing the quality of the audio signal, while preventing material damage and simplifying the deployment of cinema distribution systems.
Remote monitoring and management
SNMP connectivity interfaces amplifiers with cinema management solutions including Cinema Control (NOC) systems for remote status and fault monitoring. A HiQnet port provides access to HARMAN's Audio Architect software to control, configure and monitor amplifier operation via a standard TCP/IP network. A combined GPIO/AUX port can be used to externally recall presets, mute channels, monitor amplifier health, and manage amplifier turn-on or turn-off.
audio network
AES67 connectivity enables networked audio distribution from any Dante/AES67 compatible device and offers direct linking to Dolby Atmos Connect Interfaces. Two audio network ports support primary and secondary networks configured as switched ((daisy chain) or redundant (star). Only for SA4-D, MA4-D and LA4-D models)
Features:
Referencia : MA4
3 689,00 €
Availability: Available in supplier stock Processing time: Under 2 working days Guaranty: 3 years by manufacturerJBL - MA4 - DSI 2.0 amplifier, 4 x 1200 W under 4 ohms
With the DSi 2.0 series, JBL offers its first range of amplifiers dedicated to cinema. It is based on Crown DSi Digital Screen Array amplifier technology and incorporates Crown's acclaimed CDi DriveCore series DSP to provide powerful and efficient amplification and high-end signal processing for all ranges of cinema loudspeakers. JBL. Theater managers and integrators looking to maximize their investment and future-proof their systems can rely on JBL DSi 2.0 amplifiers to deliver high, reliable performance in ultra-efficient solutions.
High-end DSPs
DSi 2.0 amplifiers feature internal 96kHz/32-bit floating point DSP processing featuring delay (up to 1000ms), parametric EQ, crossover, FIR processing, a LevelMAX limiter and more, eliminating the need for an external processor.
Better power density
Crown's patented DriveCore technology seamlessly integrates all amplifier stages by merging them into a single integrated circuit for the highest level of efficiency, reliability and performance. Using this DriveCore technology, DSi 2.0 amplifiers provide greater power density than traditional designs, offering 4 channels of amplification with bridgeable outputs in a single 2U chassis. Using the high efficiency 2Ω mode allows up to 4 surround speakers to be powered from a single channel.
Dedicated presets JBL
By offering presets dedicated to JBL cinema loudspeaker models, these amplifiers manage the levels and frequencies of the signals sent to the transducers, maximizing the efficiency of the system and optimizing the quality of the audio signal, while preventing material damage and simplifying the deployment of cinema distribution systems.
Remote monitoring and management
SNMP connectivity interfaces amplifiers with cinema management solutions including Cinema Control (NOC) systems for remote status and fault monitoring. A HiQnet port provides access to HARMAN's Audio Architect software to control, configure and monitor amplifier operation via a standard TCP/IP network. A combined GPIO/AUX port can be used to externally recall presets, mute channels, monitor amplifier health, and manage amplifier turn-on or turn-off.
audio network
AES67 connectivity enables networked audio distribution from any Dante/AES67 compatible device and offers direct linking to Dolby Atmos Connect Interfaces. Two audio network ports support primary and secondary networks configured as switched ((daisy chain) or redundant (star). Only for SA4-D, MA4-D and LA4-D models)
Features:
Artikel-Nr : MA4
3 689,00 €