Ships to: Worldwide,
Item:401786000289Filament Status Detection Module Runout Break Detector Sensor for MK2 5 MK3 Description: The advantage of the new improved version In the previous sensor does not work well with some specific fibers. The new sensor is using an optical sensor that is triggered Through simple mechanical levers. This sensor does not care about the optical properties of the filament (it can be completely invisible) and can not die because of mechanical wear. Specification: IR sensor assembly 1. place the IR sensor on top of the body extruder and secure it with M2x8. 2. tighten M2x8 screws, the sensor should not be able to move, but be careful PCB is not unbreakable;) 3. Connect the cable, the correct orientation of the connector and wires. 4. leave clearance for the sensor as in the picture. Do not create too large a loop as it can interfere with the framework. If necessary, adjust the length, gently pulling / pushing the cable. Package Includes: Filament sensor (1x) Cable (1x) M3x18 screw (1x) M3x10 screw (1x) M3nS nut (2x) M3n notes (2x) Steel ball (1x) Magnet 10x6x2 (1x) Magnet 20x6x2 (1x) M2x8 screw (1x) Note: Please allow 1-3mm error due to hand test. The color may have different as the different display. Thanks for your understanding and finding this item. Have a nice day！☺SKU: AAX0003170877016178 Shipping And Handling Policy People always bought together withCondition:New, Brand:Unbranded, Country/Region of Manufacture:China, Designer/Brand:Unbranded, MPN:Does Not Apply, Main Colour:as described, Material:as described, Unit Size:27x8mm
PicClick Insights for "
Filament Status Detection Module Runout Break Detector Sensor for MK2 5 MK3