Inline Rowa phos reactor ROWAPHOS aquarium filtration phosphate remover

Vendu Voir des articles similaires EUR 35,03 Achat immédiat, EUR 13,63 Livraison, 30-Jour Retours, Garantie client eBay
Vendeur: aquaculture-supplies ✉️ (5.348) 98.5%, Lieu où se trouve: Shrewsbury, GB, Lieu de livraison: EUROPE, Numéro de l'objet: 222298964227 Inline Rowa phos reactor ROWAPHOS aquarium filtration phosphate remover.   Inline Rowa phos reactor ROWAPHOS aquarium filtration phosphate remover This is an Inline PhosGuard reactor which comes complete with:
• 100g ROWAphos • 1x Filter housing • 2x Mounting clips • 2x Hose tails

Feed Your Fish and Not Your Algae

Rowaphos is the professional method of removing Phosphate and Silicate in all types of Aquariums and Ponds. RowaPhos is guaranteed to remove more phosphate than any other product worldwide.

In freshwater or salt water aquariums phosphates will feed nuisance algae which can overrun plants and expensive corals spoiling the aesthetics of the tank and in extreme cases killing its inhabitants. Within the reef aquarium, phosphates will greatly affect the formation of coral skeletons by reducing calcification by over 50% and by inhibiting the deposition of strontium. It is suggested by Borneman that phosphates are a  direct poison to calcification.

RowaPhos is a unique and patented, man made ferric hydroxide material chemically engineered for the efficient removal of phosphates, arsenic and silicates from fresh and salt water, having initially been developed in Germany for treating mains water supplies. RowaPhos should not be confused with natural materials, which are generally based on aluminium oxide, (zeolite) or even other iron based products which claim to be the same product from other manufacturers.

Only Rowa make RowaPhos and any other iron based material is simply a copy with a completely different chemical structure and properties. 

RowaPhos has the largest absorption ability of any phosphate product worldwide and will not leach back in to the water. This saves the need for immediate removal once the media is exhausted. The product is easy to use and will improve the water quality wherever Phosphate or Silicate is a problem. It is of interest to Marine and Reef Aquariums where its unrivalled capabilities have shown it to be extremely beneficial in the control of nuisance algae’s and the growth of hard corals. Constant use of the product is recommended, as its abilities to control nuisance algae is a major benefit.

In an independent series of tests carried out by the Berlin Technical University on the five most commonly used phosphate removers at that time, RowaPhos was found to be the most efficient in removing phosphate from water. Other medias tested reached only to 30 – 40 % of its removal capacity by weight. Additionally RowaPhos was found to continue to remove phosphates at lower concentrations and had a higher maximum holding capacity. 

Since these tests many ferric products have been brought out which ride on the performance of the Rowa product and some even claim to be the same, however RowaPhos UNIQUE and its patented manufacturing process cannot be copied.

To obtain the best results from RowaPhos and to keep your tank at zero phosphate levels it is important when starting up a new tank or on an existing tank with phosphate levels to use RowaPhos on a permanent basis.
  • RowaPhos will absorb phosphate, silicates and arsenic. It is entirely safe in both fresh and saltwater systems. It does not release, when exhausted, any chemicals back into the water. ie phosphate, silicates or arsenic.
  • It has been used continuously on David Saxby's tank for many years at five times the recommended requirement and it is only changed when phosphate levels coming out of the reactor, where it is placed, begin to rise after approximately six to seven months.

How to use:Never wash the product unless fluidising.

It must be kept damp at all times, it is not as effective if it dries out therefore, replace the lid if not using all of the container.
Place the product between two layers of filter wool in a canister filter.
Do not sprinkle into the aquarium.
Do not place it into water without surrounding it with filter wool.
When placed in a fluidised reactor or canister filter it is possible to measure zero phosphate leaving the canister, the flow should be turned down until that is achieved.
We recommend that you use a small quantity and replace regularly rather than a large amount and infrequently.

  • We recommended that you maintain your phosphate levels as follows:
  • In saltwater aquariums below 0.015ppm (P) (0.05ppm (PO4))
  • In freshwater aquariums and ponds below 0.03ppm (P) (0.1ppm (PO4))

Use of large quantities may cause a temporary drop in pH which will return to normal after a number of hours.

  • Condition: Neuf
  • Brand: Seachem
  • EAN: 4032974404016

PicClick Insights - Inline Rowa phos reactor ROWAPHOS aquarium filtration phosphate remover PicClick Exclusif

  •  Popularité - 17 personnes suivent la vente, 0.2 de nouvelles personnes suivent la vente par jour, 70 days for sale on eBay. Super grande quantité suivi. 4 vendu, 0 disponible.
  •  Meilleur Prix -
  •  Vendeur - 5.348+ articles vendu. 1.5% évaluations négative. Grand vendeur avec la très bonne rétroaction positive et plus de 50 cotes.

Les Gens ont Aussi Aimé PicClick Exclusif