Support de poteau Galvanisé type de vis pour 'T' poteau piquet dans le sol

Save time and money! A special support that allows you to fix "T" posts of 30 mm or 35 mm and is usable in any type of soil and on any slope.

TO BUY THE KEY TO TIGHTEN THE SUPPORT AND TO BUY THE FOLLOWING POSTS  CLICK HERE  treillis métallique  

POSTS FOR THIS SUPPORT: 

- PVC COATED POST 30X30

- GALVANIZED POST 30X30 

- PVC COATED POST 35X35

- GALVANIZED POST 35X35

FIELDS OF USE  wire mesh fencing

Saves time  Our supports install in a single minute on any slope, unlike the 20 minutes estimated for the installation of a traditional plinth into the ground.

Saves resources  Our supports allow a reduction of 95% labouring time.

Saves raw materials  Our supports, weighing less than 2 kg, unlike the pre-fabbricated plinths whose weight varies from 10 to 20 kg, are easier to move, and involves a reduced use of tools and materials.

Easy to use  our supports are designed to ensure the application of different types of soil on any slope, while ensuring ease of use, even if you are not an expert.

Chances of recovery  Our screws can be easily unscrewed from the ground and re-used as a base for new posts, enabling significant cost savings and having full respect for the environment.

No limitation  With our supports you can fence off areas where the use of cement is banned.

TECHNICAL FEATURES

A: mounting bracket with M8 hole for 35 mm post + proper adapter for 30x30 post

L1: 460 mm

L2: 100 mm

D2: tubular support 48 mm diameter

D: plate 160 mm diameter

B: shaped hole for insertion of key and plate

The tests were performed by placing the supports in the ground by means of "screwing" and using a mechanical extractor connected to a dynamometer. 

The tests were carried out on superficial land, with natural moisture and not saturated with water.

ATTENTION : The data in the tables of held traction, vertical and horizontal, are the outcome of a calculated average of tests conducted on 20 different types of ground. 

Since these results are medium and found to have different results depending on the firmness of the ground, the tables should be used for reference purposes.

INSTALLATION INSTRUCTIONS

N.B. WHEN YOU BUY MORE PRODUCTS FROM OUR EBAY STORE 

YOU PAY A SINGLE DELIVERY FIXED PRICE!   TAKE ADVANTAGE !!!

To buy other ITALFROM products click here 

• Export français  (1839)

WE ARE AVAILABLE TO OFFER FREE ESTIMATES ACCORDING TO YOUR NEEDS:

Galvanized modular panel fencing, wire mesh fencing roll complete with posts, 

diagonal posts, wire tension, wire for tying and tensioners.

SO DO NOT HESITATE TO CONTACT US:

CONTACT

skype: export italfrom

email:  ebay@italfrom.com

tel:  0039 0825 818686

LAYING OF WIRE MESH FENCING

For long lasting and easy installation of a wire mesh fence, you should carefully read this page.

To follow the first figure below, you will need: the starting post with a single diagonal post for reinforcement (A); corner post, with 2 diagonal posts at 90° (B); intermediate post, (C1); and finally a reinforced post with 2 diagonal posts (C2).  The posts of reinforcement are required every 25 metres for linear fencing.

_____________________________________

Fences with wire mesh rolls, can come in two different types: with posts cemented or posts fixed into the soil.

Look at the picture below :

1)      In the first figure, it shows a wall or concrete cube, for which the height of the post should be the same height as the mesh plus 25cm ("h" + 25cm).

2)      In the second figure, posts fixed into the soil, the post should be the same height as the mesh plus 50cm ("h" + 50cm).

__________________________________________

Depending on the length of the perimeter, the number of the posts and the necessary accessories must be determined for installation.  The posts should be placed at a distance, preferably every 2 metres.

You will then need to measure the sides of the fencing and carefully count the posts needed.

  _________________________________________

VARIOUS STEPS OF THE IMPLEMENTATION OF THE FENCE:

1)  Installation of posts and diagonal posts. 

1)      Decide the type of fence to be installed (fixed into the soil or cemented).

2)      Outline well the area of the fence with a rope like a bricklayer’s, with which it should be marked in a straight line to the border

3)      Once you have outlined well the area of fencing, it is necessary, according to your needs, to set the frame of the fence (in the soil or in the cement), as well as the posts and diagonal posts.

4)      It is better to start laying with the corner posts.

If you want to fix the posts with cubes of cement mortar , you should dig a hole of about 25x25x25cm.  After filling the hole with cement mortar, the post should be driven in until it touches the bottom, held in alignment with the placed ropes and checked with a spirit level.

If however, the posts are to be fixed into the soil, the hole should be about 50cm

2)  INSTALLATION OF TENSION WIRE AND RESPECTIVE TENSIONERS

Once you have constituted the frame of your fence with the positioning of the posts and diagonal posts, the next step is essential.  It is to give robustness to the fence, by passing the tension wire through the holes on each post and tying them to the respective tensioner.

Once you have applied the tensioner to the respective tension wire (preferably at a distance of about 15cm from the post) with the help of a pincer or respective key, pass the tension wire into the tensioner which will allow you to pull the tension wire to the right point, to strengthen your fence to the maximum.

3)   INSTALLATION AND SECURING OF THE MESH

The last step that remains, to see your work completed, is the installation of the mesh, which is generally done by starting at the starting post and by tying the mesh with the binding wire to the post.

At this point you can proceed with the unrolling of the mesh, along all the posts you have installed, by tying the mesh to the tension wire and to the respective posts.

Join the last part of the fence, making sure that the mesh is tight on every point, tying it like you did at the first post.

At this point you can see, with a lot of satisfaction, your completed work .

IF YOU WOULD LIKE AN INVOICE, PLEASE INFORM US, BY MESSAGE, AT THE TIME OF PURCHASING, 

OTHERWISE IT WILL BE GIVEN IN THE FORM OF A RECEIPT.  

FOR ANY PROBLEMS, BEFORE LEAVING A NEGATIVE OR NEUTRAL

 FEEDBACK, PLEASE CONTACT US AND WE WILL RESOLVE

THE PROBLEM IMMEDIATELY

DISPATCHED 24/48 HOURS FROM ORDER